Bramidan Baler Model X25
Bramidan Balers offers a large range of High Quality Vertical Balers in various sizes. Please See the Bramidan X25 Model below.
About Baler X25 HD
Makes half mill size balesThe X25 HD is equipped with cross cylinders, giving you stable compression and superior press force, together with a low overall height. Combined with a long stroke, a high bale weight can be achieved.
This baler is designed with easy servicing in mind, for example the positioning of the hydraulic unit mounted below the control panel on the side of the machine. The finished bale can be tied with polyethylene twine or steel wires.
Meets and exceeds ANSI Standards Z245.5 and OSHA Safety Standards. UL® & CUL® Approved Control Panel.
Due to an unique hydraulic system
- Safe and steady opening of door
Operated by a strong threaded spindle
- Easy installation
Very low overall height
Model Baler X25 HD
|Press force (lbs)||55,200|
|Power supply||208/230/480V 3-phase 60Hz|
|Noise level (dB)||59-60|
|Cycle time (sec)||23|
|Dimensions WxDxH (inch)||69 x 50 x 79|
|Feed opening WxH (inch)||43 x 21|
|Load height (inch)||38|
|Chamber height (inch)||54|
|Bale size WxDxH (inch)||48 x 30 x 30|
|Bale weight OCC (lbs)||500-650|
|Bale weight plastic (lbs)||550-775|
- The cross cylinders ensure stable compression and a low overall height.
- The bale is ejected by a safe two-hand operation.
- A threaded spindle ensures steady and safe opening of the main door.
Latest Quote Requests
|Marathon Compactor wanted i Alexandria, VA||Virginia|
|60" Vertical Baler wanted in McDonough area, GA||Georgia|
|Waste Services needed in Washington DC||District of Columbia|
|Single Phase Vertical Baler wanted in Ann Arbor, MI||Michigan|
|Used 2 Ram Baler needed in Oregon||Oregon|